git clone https://github.com/garywangcn/bpi-r2_lede.git cd bpi-r2_lede/ git checkout bpi-r2-on-lede-v1 make menuconfig
here “Target System” must be set to “MediaTek Ralink ARM” and in “Boot Loaders” the entry “u-boot-bpi_r2” must be selected with a ∗
build with:
make -j1 V=s
nach dem kompilieren liegen 2 img-Dateien im Ordner build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-mediatek_32/:
frank@Frank-Laptop:/media/data_ext/bpi-r2_lede$ ls -lh build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-mediatek_32/*.img -rw-r--r-- 1 frank frank 67M Jan 16 12:03 build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-mediatek_32/mtk-bpi-r2-EMMC.img -rw-r--r-- 1 frank frank 67M Jan 16 12:03 build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-mediatek_32/mtk-bpi-r2-SD.img
img-files are on my gdrive
Please note that lede currently not support hdmi-output (you will see only a purple screen).
dd if=mtk-bpi-r2-SD.img of=/dev/sdx
By default lan-ports are bridged together with IP-address 192.168.1.1
Further configuration see here: https://wiki.openwrt.org/doc/uci/network