User Tools

Site Tools


en:bpi-r64:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:bpi-r64:start [2020/06/13 18:36]
frank [BananaPi R64]
en:bpi-r64:start [2020/07/26 15:14] (current)
frank [known Issues]
Line 27: Line 27:
   * pcie slot 1 (cn8) not working properly due to hardware design mistake (missing capacitors on tx lines) in v1.0 (gen1 seem to work)   * pcie slot 1 (cn8) not working properly due to hardware design mistake (missing capacitors on tx lines) in v1.0 (gen1 seem to work)
   * pcie slot 0 (cn25) seems to bring not enough power for mt7615 (>21dbm) without changing an resistor ([[http://​forum.banana-pi.org/​t/​bpi-r64-openwrt-kernel-5-4-40-running-from-emmc/​11087/​107|link]]   * pcie slot 0 (cn25) seems to bring not enough power for mt7615 (>21dbm) without changing an resistor ([[http://​forum.banana-pi.org/​t/​bpi-r64-openwrt-kernel-5-4-40-running-from-emmc/​11087/​107|link]]
 +  * instructions for fixing pcie hw-issues: http://​forum.banana-pi.org/​t/​bpi-r64-pcie-issues/​10284/​99
   * sgmii (lan-ports) has some problems with phylink (static ip works, dhcp not) if checking for SGMII_LINK. Current dsa-driver working without this check   * sgmii (lan-ports) has some problems with phylink (static ip works, dhcp not) if checking for SGMII_LINK. Current dsa-driver working without this check
   * pwm7 seems not available (gpio101 not pwm)   * pwm7 seems not available (gpio101 not pwm)
   * pwm3 is inverted and connected to fan-socket...no info how to drive correctly   * pwm3 is inverted and connected to fan-socket...no info how to drive correctly
  
en/bpi-r64/start.txt · Last modified: 2020/07/26 15:14 by frank