User Tools

Site Tools


en:bpi-r2:storage

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:bpi-r2:storage [2019/07/31 14:38]
frank [SD-Card]
en:bpi-r2:storage [2019/07/31 14:39] (current)
frank [preloader]
Line 11: Line 11:
   sudo dd if=BPI-R2-EMMC-boot0-DDR1600-20190722-2k.img of=/dev/sdc bs=1k seek=2   sudo dd if=BPI-R2-EMMC-boot0-DDR1600-20190722-2k.img of=/dev/sdc bs=1k seek=2
  
-(SD-Card ​benötigt zusätzlich ​MMC_BOOT & BRLYT header, ​siehe weiter unten)+(SD-Card ​needs additional ​MMC_BOOT & BRLYT header, ​see below)
  
 {{ :​bpi-r2:​bpi-r2-emmc-boot0-ddr1600-20190722-0k.img.gz |for EMMC}} have to be written at 0-offset (0x0) of boot0-Partition {{ :​bpi-r2:​bpi-r2-emmc-boot0-ddr1600-20190722-0k.img.gz |for EMMC}} have to be written at 0-offset (0x0) of boot0-Partition
en/bpi-r2/storage.txt · Last modified: 2019/07/31 14:39 by frank